There will be times that a pin needs to be adjusted or moved to a new location on your drawing. StructionSite offers the ability to adjust or move any pins that are on your project from the Web App. You can only move existing pins from a drawing.

NOTE: This feature is only for the Web App and does not allow you to move VideoWalks.

Moving 360 Pins on Web App:

1. Open the drawing that has 360 pins needing adjustments.

2. Move your cursor and select the 360 pin to bring up a preview of the content.

3. Select the 4 directional arrow icon that states "Move.”

4. After you have selected “Move,” place the pin at new location on your drawing.

5. Your pin and all the content is moved.

Adjusting/Rotating Standard Pins:

1. Open the drawing that has standard pins needing adjustments.

2. Move your cursor and select the Standard pin to bring up a preview of the content.

3. Select the 4 directional arrow icon that states "Adjust.”

4. You will then be presented with the option to rotate or move the pin.

5. If you select "Rotate," you will be able to change direction the arrow is facing with

your cursor.

NOTE: You can hold SHIFT to rotate the pin more precisely.

6. If you select "Move," place the pin at new location on your drawing.

7. Your pin and all the content is moved.

We hope this article has been helpful. If you have any questions please reach out to [email protected].