While we always recommend capturing images directly through the StructionSite app, sometimes it may be more convenient to capture an image on your mobile device and upload the image at a later time. In these cases, StructionSite allows users to upload Standard images directly from your mobile device's camera roll.


To Add an Image from Your Camera Roll to a New Pin:

1. In the mobile app, open the drawing on which you want to add images.

2. In the capture toolbar at the bottom of your screen, select Standard mode.

3. To establish the image location, press and hold down on the drawing where you want to add a new pin.

4. After roughly 3 to 5 seconds, the "Adding a new standard pin" menu will open.

5. Here, choose "Upload From Camera Roll."

6. In your mobile device's camera roll, select the image you want to upload.

7. After adding images, to complete this process, just sync these items.


To Add an Image from Your Camera Roll to an Existing Pin:

1. In the mobile app, open the drawing on which you want to add images.

2. In the capture toolbar at the bottom of your screen, select Standard mode.

3. Select the pin you want to add an image from your camera roll to.

4. Next, choose the camera + icon.

5. This will open the "Adding a progress image" menu.

6. Choose "Upload From Camera Roll."

7. In your mobile device's camera roll, select the image you want to upload.

8. After adding images, to complete this process, just sync these items.


We hope this article has been helpful. If you have any questions please reach out to support@structionsite.com

Did this answer your question?