NOTE: It is absolutely essential that the firmware is updated prior to using mobile VideoWalk. The workflow will not work otherwise.
(more cameras coming soon)
-Omnidirectional light (if walking indoors with inconsistent lighting)
-High-end UHS-I U3 Micro-SD Card
Officially compatible SD cards
Note: Please do NOT use an SD card that is not mentioned on this list, as it may cause the camera to disconnect during recording!
Updating the firmware
- Download the Garmin VIRB app to your mobile device
- Connect the Garmin VIRB to your mobile device via WiFi (from the main menu, select Wireless > WiFi, and select the WiFi toggle switch to turn on the WiFi radio)
- Open the Garmin VIRB app and follow the on-screen instructions
First time setup of the Garmin VIRB
- Ensure you have a mini-SD card inside of the camera, with at least 16GB of space
Using the Mobile Workflow
Step 1. Connect the VideoWalk capable camera to your phone via WiFi.
Step 2. While navigating a drawing, select “Walk” mode
Step 3. Specify your starting position
Step 4. Walk! Some tips: to ensure that StructionSite’s AI-powered computer vision can keep track of your movement:
-Walk at a normal walking pace
-Walk slower through narrow hallways and tight spaces.
Step 5: When you finish, move your position over your end point and hit the Stop button
Step 6: Repeat steps 3-5 in multiple areas of the project or multiple levels, until you’re satisfied with the coverage.
Step 7: Turn off the 360 camera and sync.
You will receive an email notification when the path is in process and will be ready to be within 24 - 48 hours! The path will automatically be generated and blurry frames removed.